WILKERSON INSTRUMENT CO., INC.

MM1000 DC Input Plug-In Single Alarm
Mighty Module

Wici Logo
Home Button Wilkerson Instrument Co.    800-234-1343 Wilkerson Instrument Co Blog PageWilkerson Instrument Co LinkedIn PageShopping Cart

MM1000

MM1000
DC Input
Plug-In
Single Alarm

Mighty Module

$265.00

The following information must be entered to complete your order:
See "Specifications" below for Input range limits.

Power:

Input:
Zero Scale
Full Scale
Units
Alarm: Alarm Action
  Alarm Logic

Quantity:

 

Don't Forget Your Accessories
DMP011 11-Pin Socket for Panel or DIN-Rail Mounting $25.00
Quantity:
Specifications
CLP1 Hold Down Assembly $20.00
Quantity:
Specifications
HKB-HK2D-11 Explosion Proof Housing With DMP011 Installed $330.00
Quantity:
Specifications
DR1 DIN-Rail, 35mm Symmetrical, 39 inches (1 meter) $25.00
Quantity:
Specifications
TRK48 PVC Snap-Track, 4 ft, for MP011 $30.00
Quantity:
Specifications
 
  • Features
  • Description
  • Specifications
  • Dimensions
  • Connections
  • Provides a DPDT Relay Contact Closure at a Preset DC Input
  • Standard Fail-Safe Operation
  • Red and Green LED Alarm Status Indicators
  • Adjustable Deadband
  • 50 mV or 1 mA Minimum Input Span
  • Unlimited Choice of Input Ranges ( Within specified range limits )
  • Choice of Power Options
  • 10 Year Warranty

The MM1000 monitors a DC input signal and trips a dpdt, 5 A relay when the input exceeds the desired level. Normal operation has the relay energized for the non-alarm condition and de-energized for an alarm condition. This provides a fail-safe alarm condition for loss of power to the module. Option R reverses this mode of operation. The alarm has a set of red/green LEDs to indicate alarm status.

The MM1000 deadband adjustment allows a deadband of 0.5% to 100% of span to be set into the module. The deadband is symmetrical about the setpoint.

All Wilkerson products are designed with RFI filters and lightning protection to reduce susceptibility to electrical noise and damage by lightning.

TYPICAL APPLICATIONS
DC Motor/current limit, level/position control, HI/LO pressure alarm, power demand warning.

INPUT RANGE
Voltage select any range between ±250 V max (min span 50 mV)
Current select any range between ±5 A max (min span 1 mA)

INPUT IMPEDANCE
Voltage 200 kilohms
Current

Input Value Input Shunt Value
1 mA
10 mA
20 mA
4/20 mA
100 mA
1 A
5 A
100 Ohm
10 Ohm
5 Ohm
61.9 Ohm
1 Ohm
0.1 Ohm
0.01 Ohm

SETPOINT
0 to 100% of span

DEADBAND
0.5% to 100% of span

RELAY CONTACTS (dpdt)
Resistive Load 5 A max, 150 W max, 220 VAC max, 30 VDC
Inductive Load (Power factor > 0.4)
   2.5 A max, 75 W max, 220 VAC max, 30 VDC max

TRANSISTOR OUTPUT
Open-collector output sink 30mA, 30 V supply max

RESPONSE TIME
(Range Dependent) 20 ms typical

ACCURACY
±0.01% of span

COMMON MODE REJECTION
120 dB, DC to 60 Hz

OPERATING TEMPERATURE
14°F to 140°F/-10°C to 60°C

TEMPERATURE STABILITY
±(0.02% of span + 30 uV)/°C max

POWER
115 VAC ±10%, 50/60 Hz (2.5 W max)
230 VAC ±10%, 50/60 Hz (2.5 W max)
(DC Power Option)
24 VDC (limits 21-32 VDC)
12 VDC (limits 10-16 VDC)

Isolation, DC power supply to input common: 10 kilohms

 

Mighty Module Dimension Drawing

PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
PIN 10
PIN 11
Power AC L1 or DC +
No Connection
Power AC L2 or DC -
Input +
Input -
Relay Set 1 NO
Relay Set 1 C
Relay Set 1 NC
Relay Set 2 NO
Relay Set 2 C
Relay Set 2 NC
Specifications    Manual

Solutions Provider for Signal Conditioning and
Process Control Instrumentation