|
BX Series
Photo Sensor
FEATURES
 | Selectable - 3 Time Modes by DIP Switch. |
| Power - 12 to 240 Vdc, 24 to 240 Vac |
| Easily Connected |
| Built In Power Polarity Protection,
Surge Protection, Short-Circuit Protection |
| Sealed to IP66 (IEC specification) |
| Available Outputs - NPN / PNP Open
Collector, Relay |
SPECIFICATIONS
Free Power Voltage
| Model |
Standard |
BX15M-TFR |
BX5M-MFR |
BX3M-MFR |
BX700-DFR |
| Timer |
BX15M-TFR-T |
BX5M-MFR-T |
BX3M-MFR-T |
BX700-DFR-T |
| Type |
Through |
Retroreflective |
Polarized |
Diffuse |
| Detecting Distance |
15M |
0.1 to 5M |
0.1 - 2M
(MS-2 Mirror) |
0.1 - 3M
(MS-3 Mirror) |
700mm (200 x 200mm White Tissue) |
| Detecting Target |
Opaque
Materials of Min. 15mm |
Opaque
Materials of Min. 60mm |
Transparent,
Translucent, Opaque Materials |
| Response Time |
Max.
20mS |
| Power Supply |
24
to 240 Vac +10% 50/60 Hz
24 to 240 Vdc +10% (Ripple P-P Max 10%) |
| Power Consumption |
Max.
3VA |
| Source of Light |
Infrared
LED |
Red
Photo Diode |
Infrared
LED |
| Sensitivity |
Adjustable
by VR |
| Operating Mode |
Selectable
Light ON or Dark ON |
| Control Output |
Relay
Contact Output SPDT: 30 Vdc 3 A, 250 Vac 3 A 1c resistive load |
| Self
Diagnostic Output |
Green
LED Indicator |
| LED
lights in unstable operation |
| Timer Function |
ON
/ OFF Delay, selectable one shot delay. Delay time:0.1 to 5 Sec adjustable |
| Indicator |
Operating
Indicator: Red LED, Self Diagnostic Output: Green LED, Detection Indicator:
Yellow LED |
| Connection |
Terminal
Connection |
| Insulation Resistance |
Min.
20 Meg. Ohm @ 500 Vdc |
| Noise Strength |
Power
Line +/- 1000 V at Pulse band 1 us of noise simulation |
| Dielectric Strength |
1000
Vac 50/60 Hz for 1 Minute |
| Ambient Operating
Illumination |
Sunlight:
11,000 Lux. Max., Incandescent Lamp: 3,000 Lux. Mac. |
DC
Power Voltage
| Model |
Standard |
BX15M-TDT-P |
BX5M-MDT-P |
BX3M-MTD-P |
BX700-DDT-P |
| Timer |
BX15M-TDT-TP |
BX5M-MDT-TP |
BX3M-MTD-TP |
BX700-DDT-TP |
| Type |
Through |
Retroreflective |
Polarized |
Diffuse |
| Detecting Distance |
15M |
0.1 to 5M |
0.1 - 5M
(MS-2 Mirror) |
0.1 - 3M
(MS-3 Mirror) |
700mm
(200 x 200mm White Tissue) |
| Detecting Target |
Opaque
Materials of Min. 15mm |
Opaque
Materials of Min. 60mm |
Transparent,
Translucent, Opaque Materials |
| Response Time |
Max.
1mS |
| Power Supply |
24 to 240 Vdc +10% (Ripple P-P Max10%) |
| Power Consumption |
Max 40 mA |
Max
30 mA |
| Source of Light |
Infrared
LED |
Red
Photo Diode |
Infrared
LED |
| Sensitivity |
Adjustable
by VR |
| Operating Mode |
Selectable
Light ON or Dark ON |
| Control Output |
PNP
Open Collector Output:
Voltage 2.5 V Min, Current 200mA Max |
| Self
Diagnostic Output |
NPN
Open Collector Output/Green LED
Load Voltage: Max 30 Vdc, Load Current Max 50 mA |
| LED
lights and output turns on in unstable operation |
| Timer Function |
ON
/ OFF Delay, selectable one shot delay. Delay time:0.1 to 5 Sec adjustable |
| Indicator |
Operating
Indicator : Red LED, Self Diagnostic Output: Green LED, Detection Indicator:
Yellow LED |
| Connection |
Terminal
Connection |
| Insulation Resistance |
Min.
20 Meg. Ohm @ 500 Vdc |
| Noise Strength |
Power
Line + 240 V at Pulse band 1 us of noise simulation |
| Dielectric Strength |
1000
Vac 50/60 Hz for 1 Minute |
| Ambient Operating
Illumination |
Sunlight:
11,000 Lux. Max., Incandescent Lamp: 3,000 Lux. Mac. |
|
