FEATURES

	Spans from 10 Hz to 50 KHz
	Selectable Response Time & Filter
	Plug-in Terminal Blocks
	Standard DIN rail Mount With Easy Snap-on Snap-off
	User-Settable Input and Output Ranges
	Fully Labeled Jumper Positions for Easy Range Settings
	User Write-on Label
	Connections and Ranging Readily Accessible From The Front
	Choice of Power Options
	Permanent Warranty
	UL, cUL Certified

DESCRIPTION

The DM7010 provides an isolated voltage or current output proportional to a frequency input.

The wide input voltage range allows the product to be used with low level magnetic pickups, for flow or speed applications, as well as digital signals or direct power line monitoring.

A selectable pull-up resistor allows the product to be driven from a switch closure or open collector transistor.  It will also accept CMOS or TTL inputs.

The DM7010 includes filtering and conditioning to reduce susceptibility to transients and noisy operations. It utilizes a feedback VCO to develop a pulse train with a duty cycle proportional to the input signal amplitude. This pulse train is coupled through a pulse transformer to the output circuitry, where the duty cycle data is converted to a proportional DC output level.

Connections are made via two 4-pin plug-in terminal blocks. These terminal blocks allow the product to be removed without unwiring the connections.

TYPICAL APPLICATIONS

Useful for measuring and controlling flow, motor speed and conveyor speed.

MOUNTING

The module mounts on a standard H-35 DIN rail. A spring latch holds it in place. The module is demounted by using a screw driver to release the latch. The latch release is accessible at the bottom of the module.

SPECIFICATIONS