Page 3

Test Here

DR9011T Base Transmitter

DR9011R Base Receiver

	Two 4-20 mADC Inputs
	Four Digital Open Collector Transistor or Switch Contact Inputs
	Power Requirement: 12 or 24 VDC ±10%

	Two 4-20 mADC Output Signals
	Four Optically Isolated Open
	Collector Output Signals

	The DR9011T Transmitter and the DR9011R Receiver are Factory Pre-Calibrated as a Pair (no field programming necessary)
	20+ Mile Range with Line of Sight Yagi Antenna
	1000 ft. In Plant Range (unobstructed) with 1/4 Wave Antenna
	902-928 MHZ ISM License Free Band (no site license required)
	Interference Free “Frequency Hopping” Spread Spectrum Technology
	Space Saving DIN Rail Mounting Package.

DR9014T 4 Channel Transmitter

DR9014R 4 Channel Receiver

	Four 4-20 mADC inputs
	Four Digital Open Collector Transistor or Switch Contact Inputs
	Power Requirement: 12 or 24 VDC ±10%
	Optional Sensor Input Cards for Direct Sensor Inputs

	Four 4-20 mADC Output Signals
	Four Optically Isolated Open Collector Output Signals
	One Optically Isolated Open Collector Link Status Output
	Power Requirement: 12 or 24 VDC ±10%

The DR9014T Transmitter and the DR9014R Receiver offers the same great features as the DR9011 series, with the additional capability of multiple inputs / outputs.

Direct Sensor Input Cards for DR Wireless Transmitters.
These sensor input cards provide built in “Plug and Play” sensor signal conversion within the DR9 series transmitters. This powerful option eliminates the need and cost of separate signal transmitters to provide a 4-20 mADC process signal.

Sensor cards can be changed in the field for conversion to different sensor types, ranges, etc.

DRS3031 RTD Input, 3 wire, 100 ohm Pt., .00385
DRS4001 Single DC, Voltage or Current
DRS4002 Dual 4-20 mADC

DR24V-1.5A Power Supply
The DR24V-1.5A Power Supply is a DIN Rail mount precision 24 VDC supply packaged to match the wireless products listed above. The power supply features a regulated 24 VDC short circuit protected output.