S Series Text

S Series
Variable Frequency
Drive

FEATURES

Voltage Ratings:

200-230 VAC, 3 phase
380-460 VAC, 3 phase

	1 HP to 100 HP
	Enclosure: IP00~IP20
	Inverter Type: PWM with IGBT
	Control Method: Sensorless Vector with Space Vector Technology
	1~15 kHz Carrier Frequency
	0~ 400 Hz Output Frequency
	Removable Keypad (Able to read & write parameter for drive cloning)
	Intelligent Accel/Decel for Trip-Free Operation
	State of art window based drive software
	On board diagnostics
	Auto Tuning
	3 Multi-Function Inputs
	2 Multi-Function Output
	Built-in PID Control
	Pre-Set Speeds
	2 & 3 wire operation
	Multi-step Programmable Run Patterns
	Auto Torque Boot
	DC Injection Braking
	Stall Prevention
	Built-In Braking Circuit on 1~10 HP units
	CE UL cUL ISO9001

DESCRIPTION

The S Series is an open loop flux vector drive. It has a built-in PID algorithm that controls flood, temperature, pressure, etc. through the proportional, integral and differential calculus between the feedback value and reference value. The high speed CPU performs the calculation effortlessly and quickly.

The auto-tuning algorithm in S Series sets the motor factors automatically is designed to identify your motor's equivalent circuit prior to operation. A proprietary auto-tuning feature performs a series of tests, based upon information found on the motor nameplate. Auto-tuning resolves the traditional commissioning difficulties in low speed by the load variation and the low torque.

The S Series has several additional I/O boards that can be easily mounted into the connection terminal on control board. Each I/O board is standardized for a specific I/O requirement. The three main I/O boards are "Sub-board A", "Sub-board B" and "Sub-board C". This helps system engineer design most adequate and cost-effective system using the exactly necessary number of I/Os and functions. It is extendable and changeable in case of system upgrade or change. The control parameters and detailed functions for these boards are not shown until any of them is inserted.

SPECIFICATIONS

230V Class (1 ~ 30HP)

Model Number (CI-xxx-S2)		001	002	003	005	007	010	015	020	025	030
Motor Rating	HP	1	2	3	5	7.5	10	15	20	25	30
Motor Rating	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22
Output Ratings	Capacity [kVA]	1.9	3.0	4.5	6.1	9.1	12.2	17.5	22.9	28.2	33.5
	FLA [A]	5	8	12	16	24	32	46	60	74	88
	Frequency	0 ~ 400 Hz (Sensorless Vector Control: 0 ~ 300Hz, Sensored Vector Control: 0 ~ 120 Hz)
	Voltage	200 ~ 230 V
Input Ratings	Voltage	3 Phase, 200 ~ 230 V (± 10 %)
Input Ratings	Frequency	50 ~ 60 Hz (± 5 %)
Dynamic Braking	Braking Circuit	On Board		On Board		On Board		Optional (Braking Unit, Resistor)
	Average Braking Torque	100%		100%		100%		150%
	Max. Continuous Baking Time	5 seconds		5 seconds		5 seconds		Controlled by Braking Unit
	Max. Duty	30 % ED		30 % ED		30 % ED		10 % ED
Weight [lbs]		4.6	4.6	4.8	4.9	7.5	7.7	13.8	14.3	19.4	20

230V Class (40 ~ 75HP)

Model Number (CI-xxx-S2)		040	050	060	075
Motor Rating	HP	40	50	60	75
Motor Rating	kW	30	37	45	55
Output Ratings	Capacity [kVA]	46	55	68	84
	FLA [A]	122	146	180	220
	Frequency	0 ~ 400 Hz (Sensorless Vector Control: 0 ~ 300Hz, Sensored Vector Control: 0 ~ 120 Hz)
	Voltage	3 Phase, 200 ~ 230 V
Input Ratings	Voltage	3 Phase, 200 ~ 230 V (± 10 %)
Input Ratings	Frequency	50 ~ 60 Hz (± 5 %)
Dynamic Braking	Braking Circuit	Optional (Braking Unit, Resistor)
	Average Braking Torque	150%
	Max. Continuous Baking Time	Controlled by Braking Unit
	Max. Duty	10 % ED
Weight [lbs]		42	42	61	61

460V Class (1 ~ 30HP)

Model Number (CI-xxx-S4)		001	002	003	005	007	010	015	020	025	030
Motor Rating¹	HP	1	2	3	5	7.5	10	15	20	25	30
Motor Rating¹	kW	0.75	1.5	2.2	3.7	5.5	7.5	11	15	18.5	22
Output Ratings	Capacity² [kVA]	1.9	3.0	4.5	6.1	9.1	12.2	18.3	22.9	29.7	34.3
	FLA [A]	2.5	4	6	8	12	16	24	30	39	45
	Frequency	0 ~ 400 Hz (Sensorless Vector Control: 0 ~ 300Hz, Sensored Vector Control: 0 ~ 120 Hz)
	Voltage	380 ~ 460 V ³
Input Ratings	Voltage	3 Phase, 380 ~ 460 V (± 10 %)
Input Ratings	Frequency	50 ~ 60 Hz (± 5 %)
Dynamic Braking⁴	Braking Circuit	On Board		On Board		On Board		Optional (Braking Unit, Resistor)
	Max. Braking Torque	100%		100%		100%		150%
	Max. Continuous Baking Time	5 seconds		5 seconds		5 seconds		Controlled by Braking Unit
	Max. Duty	30 (3) % ED		30 (2) % ED		30 % ED		10 % ED
Weight [lbs]		4.7	4.7	4.8	4.9	7.5	7.7	13.8	14.3	19.4	20

460V Class (40 ~ 100HP)

Model Number (CI-xxx-S4)		040	050	060	075	100
Motor Rating¹	HP	40	50	60	75	100
Motor Rating¹	kW	30	37	45	55	75
Output Ratings	Capacity² [kVA]	45	56	68	82	100
	FLA [A]	61	75	91	110	152
	Frequency	0 ~ 400 Hz (Sensorless Vector Control: 0 ~ 300Hz, Sensored Vector Control: 0 ~ 120 Hz)
	Voltage	380 ~ 460 V ³
Input Ratings	Voltage	3 Phase, 380 ~ 460 V (± 10 %)
Input Ratings	Frequency	50 ~ 60 Hz (± 5 %)
Dynamic Braking⁴	Braking Circuit	Optional (Braking Unit, Resistor)
	Max. Braking Torque	150%
	Max. Continuous Baking Time	Controlled by Braking Unit
	Max. Duty	10 % ED
Weight [lbs]		45	45	63	63	68

Indicates the maximum applicable capacity when using 4 pole motor.

^{Rated capacity (√
3*V*I)is based on 220V for 200V class and 440V for 400V class.
^{Maximum output voltage will
not be greater than the input voltage. Output voltage less than the input
voltage can be programmed.

1~5 HP inverters have internal braking resistors as standard. 7.5~10 HP inverters utilize optional braking resistors.}}

Common:

CONTROL	Control Method			V/F Control, Sensorless Vector Control (Selectable)
	Frequency Setting Resolution			Digital Reference: 0.01 Hz (Below 100 Hz), 0.1 Hz (Over 100 Hz) Analog Reference: 0.03 Hz / 60 Hz
	Frequency Accuracy			Digital: 0.01 % of Max. Output Frequency Analog: 0.1 % of Max. Output Frequency
	V/F Ratio			Linear, Squared Pattern, User V/F
	Overload Capacity			150 % of Rated Current for 1 Min., 200% of Rated Current for 0.5 sec. (Characteristic is Inversely Proportional to Time)
	Torque Boost			Manual Torque Boost (0 ~ 20 %), Auto Torque Boost
OPERATION	Input Signal	Operation Method		Key / Terminal / Communication Operation
		Frequency Setting		Analog: 0 ~ 10V / 4 ~ 20mA / Additional port for Sub-Board (0 ~ 10V) Digital: Keypad
		Start Signal		Forward, Reverse
		Multi-Step		Up to 8 Speeds can be Set (Use Multi-Function Terminal)
		Multi Step Accel/Decel Time		0 ~ 6,000 sec, Up to 4 Types can be Set and Selected for Each Setting (Use Multi- Function Terminal) Accel/Decel Pattern: Linear, U-Curve, S-Curve
		Emergency Stop		Interrupts the Output of Inverter
		Jog		Jog Operation
		Auto Operation		Operates from Internal Sequence by Setting Multi-Function Terminal (5 Way * 8 Step)
		Fault Reset		Trip Status is Removed when Protection Function is Active
	Output Signal	Operating Status		Frequency Detection Level, Overload Alarm, Stalling, Over Voltage, Under Voltage, Inverter Overheating, Running, Stop, Constant Speed, Inverter By-Pass, Speed Searching, Auto-Operation Step, Auto-Operation Sequence
		Fault Output		Contact Output (30A, 30C, 30B) – AC250V 1A, DC30V 1A
		Indicator		Choose 1 from Output Frequency, Output Current, Output Voltage, DC Voltage (Output Pulse: 500Hz, Output Voltage: 0 ~ 10V)
	Operation Function			DC Braking, Frequency Limit, Frequency Jump, Second Function, Slip Compensation, Reverse Rotation Prevention, Auto Restart, Inverter By-Pass, Auto-Tuning, PID Control
Protective Function	Inverter Trip			Over Voltage, Under Voltage, Over Current, Fuse Open, Ground Fault, Inverter Overheating, Motor Overheating, Output Phase Open, Overload Protection, External Fault 1, 2, Communication Error, Loss of Speed Command, Hardware Fault, Option Fault etc.
	Inverter Alarm			Stall Prevention, Overload Alarm, Temperature Sensor Fault
	Momentary Power Loss			Less than 15msec: Continuous Operation, More than 15msec: Auto Restart Possible
Display	Keypad		Operation Information	Output Frequency, Output Current, Output Voltage, Frequency Value Setting, Operating Speed, DC Voltage
			Trip Information	Indicates a Fault when the Protection Function activates, Retains Up to 5 Faults
Environment	Ambient Temperature			-10 °C ~ 40 °C (14 °F ~ 104 °F)
	Storage Temperature			-20 °C ~ 65 °C (-4 °F ~ 149 °F)
	Ambient Humidity			90 % RH Max.(Non-Condensing)
	Altitude - Vibration			Below 1,000m or 3,300ft · Below 5.9m/sec²(=0.6g)
	Application Site			No Corrosive Gas, Combustible Gas, Oil Mist, or Dust
Cooling Method				Forced Air Cooling

^{ORDERING INFORMATION}

230V
Model	Motor Rating
Model	HP	kW
CI-001-S2	1	0.75
CI-002-S2	2	1.5
CI-003-S2	3	2.2
CI-005-S2	5	3.7
CI-007-S2	7.5	5.5
CI-010-S2	10	7.5
CI-015-S2	15	11
CI-020-S2	20	15
CI-025-S2	25	18.5
CI-030-S2	30	22

460V
Model	Motor Rating
Model	HP	kW
CI-001-S4	1	0.75
CI-002-S4	2	1.5
CI-003-S4	3	2.2
CI-005-S4	5	3.7
CI-007-S4	7.5	5.5
CI-010-S4	10	7.5
CI-015-S4	15	11
CI-020-S4	20	15
CI-025-S4	25	18.5
CI-030-S4	30	22