LS1000

LS1000
SUBMERSIBLE LEVEL SENSOR
PRESSURE TRANSDUCER / TRANSMITTER

FEATURES

	All Welded, Stainless Steel Construction
	Cable Lift Attachment Flange
	Rugged, All Encapsulated Electronics
	Anti-Clog Stand-Off
	3 Inch Diaphragm
	Leak Proof
	FM Approved
	Intrinsically Safe

APPLICATIONS

	Sewage Lift Stations
	Sludge Pumps
	Process Sumps
	Water Tanks and Reservoirs

DESCRIPTION

The LS1000 Level Sensor is a pressure transducer based level sensor designed for the rugged application of monitoring liquid level in areas where sludge and solids often clog conventional sensors. The Stainless Steel Stand-Off provides protection from solids while providing accurate measurement using a three inch diaphragm. An optional top mounting flange is available to add weight. The flange also provides a means of attaching lift cables.

SPECIFICATIONS

Output:	4/20 mADC
Excitation:	9/36 VDC
Accuracy:	0.5% FS
Wetted materials:	Type 316 Stainless Steel
Temperature Limits:	-40/+150° F
Load Impedance:	750 Ohms Maximum at 24 VDC
Zero Balance:	4.0 mADC ±1% at 70° F
Insulation Resistance:	Greater Than 10 Megohms at 50 VDC at 70° F
Proof Pressure:	2 Times Full Scale
Burst Pressure:	5 Times Full Scale
Pressure Connection:	Oil Filled Diaphragm
Cable:	Molded Polyurethane Jacket with Breather Tube and Permanent Desiccant Filter (40 ft. Cable Supplied as Standard)
Surge Protection:	Internal
Long Life Desiccant Filter:	Standard

RANGES

0/5 PSI = 0/11.54 Ft. WC
0/10 PSI = 0/23.07 Ft. WC
0/15 PSI = 0/34.60 Ft. WC
0/20 PSI = 0/46.15 Ft. WC
0/25 PSI = 0/57.68 Ft. WC
0/30 PSI = 0/69.21 Ft. WC

OPTIONS

Cable Length:	Standard is 40’. For longer length specify length desired. (500 Ft. Maximum)
Cable Lift Attachment Flange:	Facilitates lift cable attachment while adding ballast weight to assembly.

ORDERING INFORMATION

Model		Range		Cable Length		Options
LS1000		(FT or PSI)		(In Feet)		(Code)
Example:
LS1000	-	0/34.6 Ft	-	40 Ft	-	FL

LS1000 with a range of 0/34.6 Ft. (0-15 PSI), 40 ft. of cable and the cable lift attachment flange option.